Loa JBL LSR 4328P

Loa JBL LSR 4328 thuộc dòng loa kiểm âm studio của thương hiệu JBL, nằm trong một thiết kế nhỏ gọn, với tone màu đen sang trọng, được trang bị bởi những công nghệ âm thanh độc quyền mới nhất của JBL đem lại chất âm trung thực, sạch sẽ đầy uy lực, là thành phần không thể thiếu trong bộ dàn âm thanh nghe nhạc xem phim hoặc bổ trợ cho hệ thống karaoke gia đình chuyên nghiệp. Sản phẩm Loa JBL LSR 6332R nhập khẩu chính hãng giá tốt nhất có thể tìm mua tại Jblvietnam.vn đối tác tin cậy của tập đoàn âm thanh hội trường sân khấu, âm thanh karaoke Harman - JBL.

The single LSR-4328P - Two-Way 8" Bi-Amplified Studio Monitor from JBL has a bi-amplified power system that provides its 8-inch woofer with 150 watts of output and its 1" high-frequency driver with 70 watts of output. The monitor features JBL's automated RMC (Room Mode Correction) system, which, when used in conjunction with the included calibration microphone, can compensate for the low-frequency resonances in your room with the built-in digital EQ. This provides a more accurate playback of your tracks by having your monitors tuned uniquely to your workspace.

Utilizing the Harman HiQnet network protocol, you can control a multi-speaker system of LSR-4328Ps from any of the speaker's front panels, the included wireless remote control, or a computer via the monitor's USB port and the included Control Center Software. Multiple speakers can be networked via their RJ45 ports and CAT5 cable.

The LSR-4328P provides a variety of digital and analog input options. On the analog end, the monitor has a single XLR input and a 1/4" TRS jack with selectable 4 or -10dBV sensitivity. Its built-in A/D convertor allows it to accept digital AES/EBU XLR input as well as S/PDIF.

438H Low-Frequency Transducer

The 8" woofer utilizes a powerful, shielded neodymium magnet of light weight which can be used in close proximity to CRT-type monitors with no interference. The transducer utilizes a copper-clad polepiece that is designed to improve high-frequency output by reducing voice-coil inductance. A copper ribbon voice coil ensures high sensitivity, and a flux-shorting ring stabilizes the magnetic field in the gap, reducing distortion. Heat sinking has been placed close to the magnetic gap in order to draw out heat as efficiently as possible. The cone is polymer coated for uniformity of response over the woofer's passband

431G High-Frequency Transducer

The high-frequency transducer has a treated silk diaphragm that produces uniform sound. Its flat ribbon aluminum voice coil ensures low-moving mass and enables the transducer to achieve response out to 22 kHz. A lightweight neodymium magnet structure with integral heat sinking, along with Ferrofluid in the magnetic gap, enables the transducer to produce high-peak output levels with minimal power compression. The magnet structure is integrally shielded, enabling the system to be used in proximity to CRT-type monitors with no interference

Bi-amplified Power System

The LSR4328P incorporates two high-power amplifiers that provide 150 watts of power to the low-frequency transducer and 70 watts of power to the high-frequency transducer. A precision digital dividing network having high-order Linkwitz-Riley slope characteristics for smooth transition between transducers, results in imaging and lack of time smear

Đánh giá ưu điểm của Loa JBL LSR 4328

• Advanced LSR Linear Spatial Reference Design provides neutral off-axis response for greater clarity at the mix position
• Harman HiQnet Network Protocol enables system-wide control of level, EQ, input selection, solo and more
• Wireless remote control and LSR4300 Control Center Software enable control from the listening position
• Front-panel output meter with variable brightness displays signal level
• Integrated mounting points allow wall mounting for greater placement options
• Built-in handles facilitate optimum positioning

Thông số kỹ thuật của Loa JBL LSR 4328 

>> xem thêm LOA JBL Studio Monitors Series