Ampli CROWN CTs8200A
Mã hàng : CTs8200A
Bảo hành : 12 tháng
Tình trạng : Còn hàng
Xuất xứ: China Mô tả sản phẩm:
Hướng dẫn mua hàng
Phương thức thanh toán
Ampli CROWN CTs8200A
Ampli CROWN CTs8200A là cục đẩy công suất của thương hiệu JBL được nhập khẩu và phân phối chính hãng bởi jblvietnam.vn tại Việt Nam
The Crown CTs 8200 is an 8-channel power amplifier housed in a 3RU rack, designed for fixed installation use.
The CTs 8200 features multiple simultaneous channel operation modes, 70 Volt and 100 Volt support, a switching power supply, and a variable speed fan cooling system. There is a comprehensive set of front panel indicators for each channel, along with advanced, well-designed thermal protection and fault isolation circuitry. The rear panel offers individual channel level trim controls, and 4-position operating mode switches.
The CTs 8200 offers a progressive design and advanced features for a moderate price per channel, and represents a viable solution for budget-conscious commercial, theatrical, educational and houses of worship installations.
>> xem thêm POWER CROWN CTS Series
- 8-channel installation power amplifier in 3 RU rackmount enclosure with 160 Watts of power per channel at 8 Ohms
- Crown switching power supply for reduced weight
- Selectable constant voltage 70V/100V or 4/8 Ohm low impedance operation per channel pair with dedicated 4-position switches
- Multi Mode output topology allows for simultaneous dual and bridged operation
- FIT(Fault Isolation Topology) circuitry isolates faulty channels; adjacent channels remain unaffected
- TLC thermal protection circuitry engages internal channel compressor, dynamically reduces amplifier gain to reduce heat levels and prevent overheating
- Front-to-rear forced airflow cooling vents, continuously variable speed fan cooling
- Automatically inserted 35 Hz high-pass filter for channel pair in 70/100 Volt operation
- Advanced protection circuitry includes guards against shorted outputs, open circuits, mismatched loads, general overheating, DC, under/over voltage, high frequency overloads and internal faults
- Comprehensive front panel indicator array includes individual channel LED's for Bridge, Ready, Signal, Clip, Thermal and Fault; dedicated Power and Data indicators
- Blue power indicator LED flashes when amplifier shuts down during under/over voltage condition on AC mains
Ampli CROWN CTs8200A
- Damping Factor : 10 Hz - 400 Hz: >180
- Input Sensitivity : 1.4 V
- Input Impedance : 20 kOhms balanced(nominal)
- 10 kOhms unbalanced(nominal)
- Gain : 4/8 Ohm Operation: 20:1(26 dB)
- 70 Volt Operation: 50:1(34 dB)
- 100 Volt Operation: 71.4:1(37 dB)
- Frequency Response : 20 Hz - 20 kHz +/-0.5 dB @ 1 Watt
- Signal-to-Noise Ratio : 100 dB unweighted(20 Hz - 20 kHz, below rated power)
- Total Harmonic Distortion (THD) : <0.05% @1 Watt, from 20 Hz - 20 kHz
- Input Connections : 4 x Removable Phoenix Balanced Barrier Blocks
- Output Connectors : 4 x 4-pole Terminal Strips with Touch-Proof Covers*
- *1 for every 2 channels
- Controls Front Panel : 1 x Power Switch
- Controls (Rear) : 8 x 21-position Rotary Channel Level Trim Controls(-70 - 0 dB)
- 4 x 4-position Dual/Bridge Mode Switches
- Indicators : Front Panel:
- 4 x Yellow LED Bridge Mode Indicators
- 8 x Green LED Ready Indicators
- 8 x Green LED Input Signal Indicators
- 8 x Red LED Thermal Indicators
- 8 x Red LED Fault Indicators1 x Yellow LED IQ Loop Data Indicator
- 1 x Blue LED Power Indicator
- Rear Panel: None
- Cooling : Continuously Variable Speed Forced Air, Front to Back Airflow
- Power Consumption : 58 Watts, Idle, All Channels 4/8 Ohm Mode
- 77 Watts, Idle, All Channels 70 Volt Mode
- Dimensions : 19 x 5.25 x 16.25" (483 x 133 x 413mm)
- Weight : 36.6 lb (16.5 kg)
- Specialties : 8-channel Rackmount Installation Amplifier
- 4 Switchable Modes include 70 and 100 Volt Operation
- Variable Speed Fan Cooling
