Bộ đẩy công suất CROWN XLS1000
Mã hàng : XLS1000
Bảo hành : 12 tháng
Tình trạng : Còn hàng
Xuất xứ: China Mô tả sản phẩm:
Hướng dẫn mua hàng
Phương thức thanh toán
Bộ đẩy công suất CROWN XLS1000
Bộ đẩy công suất CROWN XLS1000 thuộc dòng cục đẩy công suất của thương hiệu JBL hiện được nhập khẩu và phân phối chính hãng tại jblvietnam.vn
The Crown XLS 1000 is a 2-channel power amplifier rated at 350W @ 4 ohms per channel. Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.
>> xem thêm POWER CROWN XLS Series
Crown XLS 1000 Features:
- XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
- Integrated PureBand™ Crossover System for better performance and control
- Peakx™ Limiters provide maximum output while protecting your speakers
- XLR, 1/4", RCA inputs provide outstanding flexibility
- Efficient forced-air fans prevent excessive thermal build up
- Electronically balanced XLR inputs; touch proof binding post and Speakon® outputs
- Precision detented level controls, power switch, power LED, and six LEDs which indicate signal, clip and fault for each channel
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Bộ đẩy công suất CROWN XLS1000
- Total Harmonic Distortion (THD): < 0.5%
- Intermodulation Distortion (IMD): (60Hz and 7kHz at 4:1)
- From fullrated output to -30dB: <0.3%
- Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200
- Crosstalk (below rated 8O power):
- At 1 kHz: > 85dB
- At 20 kHz: >55dB
- Input Impedance (nominal): 20 kO balanced, 10 kO unbalanced
- Load Impedance:
- 2 to 8 ohms per channel in Stereo
- 4 to 8 ohms in Bridge Mono
- AC Line Voltage and Frequency ConfigurationsAvailable (± 10%):
- 120 VAC60 Hz
- 100 VAC 50/60 Hz
- 220 and 240 VAC 50 Hz
- Ventilation: Flow-through ventilation from front to back
- Cooling: Internal heat sinks with forced-air cooling for rapid, uniform heat dissipation
- Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³)
- Integrated Processing:
- PureBand™ Crossover System
- Crossover Filter: Linkwitz-Riley 24dB per Octave
- Crossover Frequency Range: 50 HZ - 3kHz
- Crossover Mode: Crossover (CH1= LPF, CH2=HPF), Low Pass (both channels LPF), High Pass (both channels HPF),
- Bridge (LPF or HPF).
- Peakx™ limiters: Channel independent clip limiter designed to provide maximum output while protecting your loudspeakers
- Input Connectors: XLR (one per channel), 1/4-Inch (oneper channel), and RCA (one per channel). 1/4-Inch connectors can be used as loop-thrus to distribute
- signal to additional amplifiers.
- Output Connectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-poleSpeakon® connectors. The top Speakon connector is wired for both
- channels so it can be used for bridge mono wiring or for stereo wiring of two speakers to a single Speakon connector.
- One pair of back-panel binding posts per channel; accepts banana plugs or bare wire. (European models do not accept banana plugs.)
- Construction: 8.12" depth
- Dimensions (H x W x D): 3.5" x 19" x 7.7"
- Weight (Net, Shipping): 8.6 lbs, 13.6 lb
