Bộ đẩy công suất CROWN XLS2500
Mã hàng : XLS2500
Bảo hành : 12 tháng
Tình trạng : Còn hàng
Xuất xứ: China Mô tả sản phẩm:
Hướng dẫn mua hàng
Phương thức thanh toán
Bộ đẩy công suất CROWN XLS2500
Bộ đẩy công suất CROWN XLS2500 thuộc dòng cục đẩy công suất của thương hiệu JBL hiện được nhập khẩu và phân phối chính hãng tại jblvietnam.vn
Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.
Features
- XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
- Integrated PureBand™ Crossover System for better performance and control
- Peakx™ Limiters provide maximum output while protecting your speakers
- XLR, 1/4", RCA inputs provide outstanding flexibility
- Efficient forced-air fans prevent excessive thermal buildup
- Electronically balanced XLR inputs; touchproof binding post and Speakon®outputs
- Precision detented level controls, power switch, power LED, and six LEDswhich indicate signal, clip and fault for each channel
- Three-Year, No-Fault, Fully Transferable Warranty completely protects yourinvestment and guarantees its specifications
>> xem thêm POWER CROWN XLS Series
Bộ đẩy công suất CROWN XLS2500
- Total Harmonic Distortion (THD): < 0.5%
- Intermodulation Distortion (IMD): (60Hz and 7kHz at 4:1)
From fullrated output to -30dB: <0.3% - Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200
- Crosstalk (below rated 8O power):
At 1kHz: > 85dB
At 20kHz:>55dB - Input Impedance (nominal): 20 kO balanced, 10 kO unbalanced
- Load Impedance:
2 to 8 ohms per channel in Stereo
4 to 8 ohms inBridge Mono - AC Line Voltage and Frequency Configurations Available (± 10%):
120 VAC60 Hz
100 VAC 50/60 Hz
220 and 240 VAC 50 Hz - Ventilation: Flow-through ventilation from front to back
- Cooling: Internal heat sinks with forced-air cooling for rapid, uniformheat dissipation
- Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³)
- Integrated Processing:
PureBand™ Crossover System
Crossover Filter:Linkwitz-Riley 24dB per Octave
Crossover Frequency Range: 50 HZ - 3kHz
Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channelsLPF), HighPass (both channels HPF), Bridge (LPF or HPF).
Peakx™ limiters:Channel independent clip limiter designed to provide maximum output whileprotecting your loudspeakers - Input/Output:
Input Connectors: XLR (one per channel), 1/4-Inch (oneper channel), and RCA (one per channel). 1/4-Inch connectors can be used asloop-thrus to distribute signal to additional amplifiers.
OutputConnectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-poleSpeakon® connectors. The top Speakon connector is wired for both channels soit can be used for bridgemono wiring or for stereo wiring of two speakers to asingle Speakon connector.
One pair of back-panel binding posts per channel;accepts banana plugs or bare wire. (European models do not accept bananaplugs.) - Construction: 10.35" depth
- Dimensions (H x W x D): 3.5" x 19" x 10.7"
- Weight (Net, Shipping): 10.75lbs, 15.8 lbs
