Loa JBL LSR 6325P-1
Mã hàng : LSR 6325P-1
Bảo hành : 12 tháng
Tình trạng : Còn hàng
Xuất xứ: China Mô tả sản phẩm:
Hướng dẫn mua hàng
Phương thức thanh toán
Loa JBL LSR 6325P-1
Loa JBL LSR 6325P-1 là dòng loa kiểm âm studio của thương hiệu JBL, có thiết kế nhỏ gọn, tone màu đen sang trọng phù hợp với mọi không gian nội thất, được cung cấp bởi những công nghệ âm thanh độc quyền của JBL đem lại chất âm trung thực, sạch sẽ, là thành phần không thể thiếu trong bộ dàn âm thanh nghe nhạc xem phim hoặc bổ trợ cho hệ thống karaoke gia đình chuyên nghiệp. Sản phẩm Loa JBL LSR 6325P-1 nhập khẩu chính hãng giá tốt nhất có thể tìm mua tại Jblvietnam.vn , đối tác tin cậy của tập đoàn Harman tại Việt Nam.
With the advent of "desk-top" audio, the need for compact, shielded powered monitors has spurred manufacturers to fill this niche. The LSR6325P, a biamplified nearfield monitor, falls into this category and is ideal for project and home studios, digital workstations and surround sound monitoring.
The LSR6325P incorporates JBL's latest transducer technology and the LSR Studio Monitor System design philosophies, which provides the engineer or mixer greater latitude in movement without sacrificing image integrity. The workspace where the engineer, producer and artist make critical mixing decisions is typically within +/-15° of the vertical and +/-30° of the horizontal when referenced to the center spot of the monitoring environment. As a result, critical decisions about image placement, EQ, balance and timbre are much easier to accomplish.
The 5.25" LSR6325P woofer is based on research and field proven experience in low distortion, high excursion designs. The cone forms a rigid piston and is supported by a butyl rubber surround. A cast aluminum basket provides advanced heat dissipation. The high frequency device of the LSR6325P is a 1" composite diaphragm integrated with an Elliptical Oblate Spheroidal (EOS) Waveguide with 60° x 100° dispersion, which is critical to smooth spatial response.
The LSR6325P combines two high power amplifiers with an active crossover system. Active crossover circuitry results in a smooth transition in both the frequency and time domains. This results in good imaging, a lack of time smear, and superior off axis response linearity. User adjustments include level calibration for interfacing with professional and semi-professional equipment and fine-tuning of levels with a variable level control. The frequency response can be gently tailored to compensate for placement and room absorption characteristics.
Đánh giá các ưu điểm của Loa JBL LSR 6325P-1
The LSR6325P is a worthy competitor in a crowded monitor market for use in mobile and studio control room applications.
- Bi-amplified studio reference monitor for near field monitoring, mobile vans, broadcast and TV control rooms
- Lightweight for portability, high output for size
- Dual front ported enclosure for optimized low frequency reproduction
- Waveguide technology for optimized directivity
- 150 Watts of total amplification
- Built in high-pass filtering for use with optional subwoofer
- Die-cast aluminum integrated baffle and cabinet construction
- Integrated amplifiers provide optimized performance
- Magnetically shielded for use in close proximity to computer and video monitors
- Switchable multi-voltage power supply for transformer-free international use
Thông số kỹ thuật của Loa JBL LSR 6325P-1
| Low Frequency Driver | 5.25" tempered cone paper with Butyl rubber surround |
| Mid Frequency Driver | No |
| High Frequency Driver | 1" damped Titanium composite |
| Crossover | 4th order Linkwitz-Riley @ 2.3kHz |
| LF Amplifier | 100 watts |
| HF Amplifier | 50 watts |
| Frequency Range | 70 Hz - 20 kHz, +/-2.5dB |
| Impedance | Not applicable |
| Maximum Sound Pressure Level (SPL) | 109 dB at 1 Meter |
| Maximum Power Handling | Not applicable (already powered) |
| Controls and Indicators Front | 1 x On/Off Switch. 1 x Volume Control. 1 x Combination Power On/Clip LED |
| Rear | 1 x -1.5 dB, 0 dB, -1.5 dB(3 kHz - 20 kHz) High Frequency Control. 1 x Workstation Boundary Compensation(Active and Bypass) Control. 1 x 0-26 dB Variable Input Attenuator Knob. 1 x Low Frequency Alignment |
| Selector Switch | (36 dB/Octave Butterworth High Pass @ 40 Hz, 36 dB/Octave Bessel High Pass @ 40 Hz) |
| Connectors | 1 x XLR Female, Balanced. 1 x RCA Phono, Unbalanced |
| Shielded | Yes |
| Size (HxWxD) | 10.6 x 6.8 x 9.5" (269 x 173 x 241mm) |
| Weight | 17 lb (7.7 kg) |
| Specialties | Dual Front Ported Enclosure |
| Magnetically Shielded | Yes |
| Selectable Multi-Voltage Power Supply | Yes |
>> xem thêm LOA JBL Studio Monitors Series
| Low Frequency Driver | 5.25" tempered cone paper with Butyl rubber surround |
| Mid Frequency Driver | No |
| High Frequency Driver | 1" damped Titanium composite |
| Crossover | 4th order Linkwitz-Riley @ 2.3kHz |
| LF Amplifier | 100 watts |
| HF Amplifier | 50 watts |
| Frequency Range | 70 Hz - 20 kHz, +/-2.5dB |
| Impedance | Not applicable |
| Maximum Sound Pressure Level (SPL) | 109 dB at 1 Meter |
| Maximum Power Handling | Not applicable (already powered) |
| Controls and Indicators Front | 1 x On/Off Switch. 1 x Volume Control. 1 x Combination Power On/Clip LED |
| Rear | 1 x -1.5 dB, 0 dB, -1.5 dB(3 kHz - 20 kHz) High Frequency Control. 1 x Workstation Boundary Compensation(Active and Bypass) Control. 1 x 0-26 dB Variable Input Attenuator Knob. 1 x Low Frequency Alignment |
| Selector Switch | (36 dB/Octave Butterworth High Pass @ 40 Hz, 36 dB/Octave Bessel High Pass @ 40 Hz) |
| Connectors | 1 x XLR Female, Balanced. 1 x RCA Phono, Unbalanced |
| Shielded | Yes |
| Size (HxWxD) | 10.6 x 6.8 x 9.5" (269 x 173 x 241mm) |
| Weight | 17 lb (7.7 kg) |
| Specialties | Dual Front Ported Enclosure |
| Magnetically Shielded | Yes |
| Selectable Multi-Voltage Power Supply | Yes |
